第四代谷歌网盘Clone术：Fclone

转自BlueSkyXN
Jul 18, 2020 3 min read gdrive

第四代谷歌网盘Clone术：Fclone

简介

Fclone是目前最新最强的Rclone衍生产品 与rclone和gclone兼容 同时与gclone相比,能有几十上百倍的转存速度 常规转存速度也达50+files/s 相当于装满一个团队盘(40W文件),单开的情况下,只需要135分钟左右 如果将参数拉高，使用性能较好的机器，速度可达150F/s，此速度下一个盘还不要一个小时 而且如果sa够多，还能无限拉升，不怕不够快，就怕你sa不够冲 可以说是几十上百倍的提升,而且稳定性大幅提升,不会受到众多小文件影响 而且还支持参数调整,可以充分利用高配主机的性能 所有前代产品均通用,无须额外修改,安装新程序后换个命令就能用

Rclone（第一代）的安装

官方教程：https://rclone.org/install/ Linux一键脚本

curl https://rclone.org/install.sh | sudo bash

Autoclone (2nd generation)的安装并获取sa

项目地址：

https://github.com/xyou365/AutoRclone

安装方法：

Step 1. Copy code to your VPS or local machine

For Linux system: Install screen, git and latest rclone. If in Debian/Ubuntu, directly use this command

sudo apt-get install screen git && curl https://rclone.org/install.sh | sudo bash

sudo git clone https://github.com/xyou365/AutoRclone && cd AutoRclone && sudo pip3 install -r requirements.txt

Step 2. Generate service accounts What is service account How to use service account in rclone

Enable the Drive API in Python Quickstart and save the file credentials.json into project directory

‘‘Note: 1 service account can copy around 750gb a day, 1 project makes 100 service accounts so thats 75tb a day, for most users this should easily suffice. '’

python3 gen_sa_accounts.py --quick-setup 1

or

python3 gen_sa_accounts.py --quick-setup 1 --new-only

note: 这将覆盖现存的一个项目

Official limits to the members of Team Drive (Limit for individuals and groups directly added as members: 600)

对于 Gsuite Admin 管理员

  1. Turn on the Directory API following official steps (save the generated json file to folder credentials).

  2. Create group for your organization in the Admin console. After create a group, you will have an address for example`[email protected]`.

  3. run

    python3 add_to_google_group.py -g [email protected]

    对于普通用户

  4. Create Google Group then add the service accounts as members by hand. Limit is 10 at a time, 100 a day but if you read our warning and notes above, you would have 1 project and hence easily in your range.

    Step 4. Add service accounts or Google Groups into Team Drive

    Step 5. Start your task

    python3 rclone_sa_magic.py -s SourceID -d DestinationID -dp DestinationPathName -b 1 -e 600

    Add --disable_list_r if rclone cannot read all contents of public shared folder

    rclone –config rclone.conf size –disable ListR src001:

Gclone(第三代)的安装和使用

安装方法

linux一键脚本：

bash <(wget -qO- https://git.io/gclone.sh)

gclone --version

[gc]
type = drive
scope = drive
service_account_file = /root/AutoRclone/accounts/0079098d8d94d71d7a3042da3838a4d07346eb78.json
service_account_file_path = /root/AutoRclone/accounts/
root_folder_id = root

转存用法

gclone copy gc:{【源盘】ID} gc:{【目的盘】ID} --drive-server-side-across-configs

大小检查

gsize gc:{【目的盘】ID}

fclone(第四代)的安装使用

项目地址：

https://github.com/mawaya/rclone

下载地址：

https://github.com/mawaya/rclone/releases

安装使用方法：

以0.3.1为例

wget https://github.com/mawaya/rclone/releases/tag/fclone-v0.3.1
unzip fclone-v0.3.1.zip /usr/bin/fclone
chmod +x /usr/bin/fclone

使用方法

低配vps

fclone copy gc:{【源盘】ID} gc:{【目的盘】ID} —drive-server-side-across-configs --stats=1s --stats-one-line -vP --checkers=128 --transfers=128 --drive-pacer-min-sleep=1ms --check-first

低配vps推荐2

fclone copy gc:{【源盘】ID} gc:{【目的盘】ID} --drive-server-side-across-configs --stats=1s --stats-one-line -vP --checkers=128 --transfers=256 --drive-pacer-min-sleep=1ms --check-first

通用

fclone copy gc:{【源盘】ID} gc:{【目的盘】ID} --drive-server-side-across-configs --stats=1s --stats-one-line -vP --checkers=256 --transfers=256 --drive-pacer-min-sleep=1ms --check-first

fclone copy gc:{【源盘】ID} gc:{【目的盘】ID} --drive-server-side-across-configs --stats=1s --stats-one-line -vP --checkers=256 --transfers=256 --drive-pacer-min-sleep=1ms --drive-pacer-burst=5000 --check-first

中高杜甫推荐

fclone copy gc:{【源盘】ID} gc:{【目的盘】ID} --drive-server-side-across-configs --stats=1s --stats-one-line -vP --checkers=320 --transfers=320 --drive-pacer-min-sleep=1ms --drive-pacer-burst=5000 --check-first

参数说明：

–drive-server-side-across-configs #服务端传递

–stats=1s –stats-one-line -vP #日常参数

–checkers=数字 #越大越快

–transfers=数字 #越大越快

–drive-pacer-min-sleep=数字ms #越小越快

–drive-pacer-burst=数字 #越大越快

–check-first #fmod必须参数